home *** CD-ROM | disk | FTP | other *** search
- ************************************************
- * The MacArthur Study Bible, *
- * Running Logos Library System, Version 2.1 *
- ************************************************
-
- Thank you for purchasing the MacArthur Study Bible (MSB)!
- This file is intended to provide you with the most up to date information
- available at the time that this electronic library was published.
-
- Contents
- ============================================================
- I. System requirements.
- II. Installation instructions for first time installations.
- III. Installation instructions for users who have previously installed
- an earlier version of Logos Library System.
- IV. Special Features.
- V. Known problems and ways to work around them.
- VI. Contacting Nelson/Word Electronic Publishing.
-
- I. System requirements.
- ============================================================
- Any IBM compatible PC running Microsoft Windows 3.1, Windows 95, or later,
- (486sx processor or better, DOS 3.3 or later). 8MB of RAM memory required,
- 16MB or more recommended. Any Microsoft Windows 3.1, or later, compatible VGA
- graphics card and monitor. Hard disk with at least 15 Mb free space. Double-
- speed or better CD-ROM drive.
-
-
- II. Installation instructions for MSB (where no previous
- version of Logos Library System has been installed).
- ============================================================
- 1. Insert MSB CD in your CD-ROM drive.
- 2. If you are running Windows 3.1, select File...Run from the Program
- Manager. If you are running Windows 95, select Start...Run from the
- Taskbar, or, if you have Autoplay enabled, you will be prompted to run
- Setup automatically.
- 3. In the Run dialog's Command Line, type D:\SETUP (or the applicable drive
- letter of your CD-ROM drive) then press ENTER.
- 4. When prompted, click OK to select the default directories
- C:\LOGOS20 and C:\LRSYSTEM, (or replace them with the desired drive
- and directory settings and click OK). We recommend using the defaults.
- 5. Enter your name and/or company information and click OK. The setup
- program will prompt you for confirmation that you entered the correct
- information.
- 6. When prompted, click OK to accept the location of your CD-ROM drive or
- change the drive letter to the actual location of your CD-ROM drive.
- 7. Specify the Program Group name where you want application icons to be
- installed. The default location is "MacArthur Study Bible"
- You may wish to click the down arrow and choose a different group or
- type a new name for your own custom group. Click OK. The setup executable
- will install the remaining files and you will then be ready to run MSB.
-
- III. Installation instructions for users who have previously
- installed an earlier version of Logos Library System.
- ============================================================
- If you have previously installed a copy of any software from Logos or any
- other Logos Library System compatible publisher, and that software included
- Logos v2.0, v2.0a - v2.0e, please use the following instructions to install
- MSB.
-
- 1. Open your existing version of Logos and select Tools...Backup System
- Files.
- 2. In the Backup System Files dialog, navigate to a directory other than
- your \LOGOS20 or \LRSYSTEM directory and click OK.
- 3. Exit Logos.
- 4. Insert the MSB CD in your CD-ROM drive.
- 5. In the Windows 3.1 Program Manager, select File...Run. On the Windows 95
- taskbar, select Start...Run.
- 6. In the Run dialog's Command Line, type D:\SETUP (or applicable drive
- letter for your CD-ROM drive) then press ENTER.
- 7. When prompted, click OK to select the default directory C:\LOGOS20. If you
- have previously installed Logos v2.0, v2.0a - v2.0e, the text C:\LRSYSTEM
- will be grayed out and not editable. (This setting is maintained in the
- [LRSystems]section of the win.ini file.) We recommend using the defaults.
- 8. You will be prompted for the Program Group name where you want the
- program icons to be installed. If you wish to keep the icons in the same
- group as the previous installation, click the down arrow button and
- select the group name from the list. Click OK.
- 9. You will be prompted to replace the file WORDS.LWF. If you do not wish to
- replace your current Global Word List, you can select the NO button. You
- will need to rebuild the GWL later for your Topic Browser to work globally.
- See section V. of this file for more information. Setup will install the
- remaining MSB files. Click OK to the dialog that contains the "Installation
- Complete!" message and you are ready to use MSB running LLS 2.1.
-
- IV. Special Features.
- ============================================================
- DDE Link to Parsons QuickVerse and other Bible Software
- -------------------------------------------------------
- Scrolling: MSB will scroll Seed Master, QuickVerse, and QuickVerse Library
- if the option "Scroll Bibles includes other Bible Software" is turned on in
- the DDE/DVI Panel of the Preferences dialog.
- Bible Jumps: MSB will jump to locations in Seed Master, QuickVerse, and
- QuickVerse Library if bible jumps are turned on in the DDE/DVI Panel of the
- Preferences dialog.
- Searching: Selecting the "Search Other Software..." option from the right
- mouse menu in MSB searches other Bible software programs in this order:
- QuickVerse, QuickVerse Library, Seed Master. If you have more than one of
- these applications running at the time the search is initiated, MSB will
- send its search command to the first application on the list. For example,
- if QuickVerse Library is listed in the Other Bible Software line in the
- DDE/DVI panel of the Preferences dialog in MSB, but QuickVerse is also
- running, MSB will send its search command to QuickVerse. To make MSB
- search QuickVerse Library instead of QuickVerse, close QuickVerse before
- running the search.
-
- To set up QuickVerse for Windows 4.0 to run with MSB:
- Open QuickVerse for Windows, select the Options menu, and choose Other
- applications... In the "QV Library" and "Dictionary" lines of this dialog,
- type the path and file name for Logos.exe.
- Scrolling: QuickVerse for Windows will scroll books in Logos if "Synchronize
- QuickVerse Library..." is turned on in the Other Applications dialog in
- QuickVerse for Windows.
- Bible Jumps: Same as scrolling.
- Searching: Highlight a word in QuickVerse for Windows, click the QuickVerse
- Library toolbar button or select the Search menu and choose "QuickVerse
- Library" to search for the selected word in MSB. To perform an English
- Keylink search in MSB from QuickVerse, select the Search menu and choose
- Dictionary. Please refer to the MSB User's Guide for information on Keylinks
- in MSB.
- To set up QuickVerse Library for Windows to run with MSB:
- In QuickVerse Library, select the Options menu, then Preferences. In the
- "QuickVerse for Windows:" line of the Preferences dialog, type the path and
- file name for Logos.exe.
- Scrolling: Automatic if the above step is taken.
- Bible Jumps: Same as scrolling.
- Searching: After selecting text. Either click the QuickVerse toolbar button
- or select the Search menu and choose QuickVerse to search MSB.
- To set up QuickVerse for Windows 3.0 to work with MSB:
- Follow the steps outlined for QuickVerse for Windows 4.0. Keep in mind that
- the QV Library option is not available so searching will be limited to an
- English Keylink search.
-
- Word Processor Macros
- --------------------
- Lotus Ami Pro:
- An AmiPro macro is now available from Logos' Web site at
- http://www.logos.com/support/supsol.htm. Consult Logos' Web page
- (http://www.logos.com) for other updates and program enhancements.
- Word 7.0:
- The installation procedure automatically installed a file called LOGOS20.DOT
- into your LOGOS20 directory. Copy this template into your WINWORD\STARTUP
- directory and run Word. The template will automatically install two toolbar
- buttons for the new macros.
- WordPerfect:
- Copy the file LOGOS20.WCM into your WPWIN6X\MACROS directory (where X is
- your version of WordPerfect). Execute the macro by selecting Tools, Macros,
- Play... Type LOGOS20 into the box provided and click OK.
-
- IntelliMouse Support
- --------------------
- MSB supports the Microsoft IntelliMouse on Windows 95. Placing the mouse
- cursor over a window and rolling the wheel will cause the window to scroll,
- even when you are in a dialog. Clicking the mouse wheel in a window turns on
- auto-scroll mode. The mouse cursor will change into a multi-directional
- cursor, indicating the directions in which you may now scroll. Moving the
- mouse in one of those directions causes the window to scroll in that
- direction. Clicking the mouse wheel again turns off auto-scroll mode.
-
- V. Known problems and ways to work around them.
- ============================================================
- Topic Browser not available Globally
- ------------------------------------
- If the Topic Browser cannot be opened globally or is not available when no
- books are open, the Global Word List is out of date and needs to be rebuilt.
- To rebuild the Global Word List, open MSB, select the Tools menu and choose
- Rebuild Global Word List.
-
- Use All Wildcard Matches
- ------------------------
- The search option Use All Wildcard Matches will only work if a Global Word
- List is available to MSB. If the Global Word List is available but not up
- to date, the Use All Wildcard Matches option will work, but the options
- presented will be limited to the words available in the available Global Word
- List.
-
- Word Processor Macros
- --------------------
- WordPerfect
- The macro for WordPerfect is designed to work with WordPerfect for Windows
- versions 6.0 and newer. This macro does not work well with any earlier
- version of WordPerfect for Windows.
-
- Installing MSB
- ----------------
- If you are installing MSB using the Windows 3.1 operating system, the
- installer will attempt to restart Windows after the icon is created. Manually
- reboot the computer at this point to reset the system. After restarting the
- machine, launch Windows 3.1 and continue working.
-
- Starting MSB
- --------------
- If you have previously installed an earlier version of Logos Library System,
- the splash screen for that previous version might be replaced by a different
- splash screen.
-
- Printing
- --------
- If you are printing an article that contains graphics (i.e. the MSB User's
- Guide), the graphics print at a reduced size rather than their full size as
- viewed on screen. The reduction is directly related to the resolution of your
- printer. For instance, a 600 dpi printer will print the graphics 200% smaller
- than a 300 dpi printer.
-
- Support Files
- -------------
- MSB does not install the files for Search Help, Tip of the Day, and the
- User's Guide to the \<LRSYSTEM> directory. These items will not be available
- when MSB is started if the CD is not available at start-up.
-
- Search Ranges and Bibles with Alternate Book Orders
- ---------------------------------------------------
- Using pre-defined Verse Ranges or typing a custom Verse Range that uses
- hyphens to indicate a range of books in the Verse Range field of the Search
- Dialog will not always produce expected results. MSB uses the book order of
- the King James Version of the Bible for pre-defined search ranges. Several
- Bibles use book orders different than the King James Version, including, but
- not limited to the Tanakh, the Septuaginta, and the Biblia Hebraica
- Stuttgartensia.
- If you are having difficulty expressing a range of books and finding correct
- results, try listing each book title individually in the Verse Range field.
-
- DVI and Windows 3.1x
- --------------------
- If you receive an error while trying to insert a verse with DVI or DVI does
- not insert the selected verse into the selected document, check the FILES=
- setting in the file CONFIG.SYS. The value at the end of this line should be
- at least 20, preferably 30, for DVI to work properly in Windows 3.1x.
-
- DVI and Some Word Processors
- ----------------------------
- Sometimes DVI is unable to properly paste the desired text from LLS into your
- word processor program. If you run DVI and find that nothing was pasted into
- your program, select Paste from the Edit menu of your word processor to
- complete the insertion.
-
- Viewing Citation Information in Word Processors
- -----------------------------------------------
- For word processors that support Rich Text Format (such as Microsoft Word).
- citations are inserted as footnotes. To view them, you must view the footnotes
- in your document. You can do this in Microsoft Word, for example, by either
- selecting "Footnotes" from the Edit menu or by selecting "Page Layout" from
- the View menu.
-
- Jumps to Internet Sites and Windows 3.1x
- ----------------------------------------
- A hyper-text link to the Nelson\Word World Wide Web page is available from within
- MSB. Select the Help menu option "Go To http://www.NelsonWordDirect.com". For
- this to work when running MSB on Windows 3.1x, the Internet browsing
- application must already be running in the background.
-
- Boot Log
- --------
- If you are experiencing problems starting MSB, please start MSB by
- running "LOGOS /B" from File Run:
- 1. From Program Manager, select the File menu.
- 2. From the File menu, select Run.
- 3. In the Run dialog's Command Line, type 'C:\LOGOS20\LOGOS.EXE /B'and click
- OK. After the error occurs, print C:\LOGOS20\BOOTLOG.LOG from Windows Write
- or other word processor (not Notepad). Please have this information
- available when you call Nelson/Word Tech Support.
- If you are experiencing problems starting MSB while running Windows 95,
- start MSB from a Run command as follows:
- 1. Click on Start and then on Run.
- 2. On the Open line, type in 'C:\LOGOS20\LOGOS.EXE /B' and then click OK.
- After the error, find the file BOOTLOG.LOG in the LOGOS20 directory and
- double click on it. Take it to Wordpad, and print it out. Please have this
- information available when you call Nelson/Word Tech Support.
-
- VI. Contacting Nelson/Word.
- ============================================================
- Technical Support
- -----------------
- You can communicate all of your comments and inquiries via FAX to Logos Research
- Systems, Inc at (360) 675-8169. We will also gladly accept electronic technical
- requests and questions via Internet mail to the following address (please
- include your name and phone number in your email):
- tech@logos.com
- Logos Research Systems (developers of the LLS) posts technical support
- information on the LLS at their web site:
- http://www.logos.com
- Our voice number for tech support is (360)-679-4496.
-
- Setup Log
- ---------
- If you have experienced problems installing MSB, please print the
- SETUP.LOG file in your LOGOS20 directory. This contains information about
- the installation process including when the problem occurred. Please have
- this information available when you call MSB Tech Support.
-
- ------------------------------------------------------------------------------------------------------------------------
- Nelson/Word Electronic Publishing
- Nelson/Word Publishing Group
- P.O. Box 141000
- Nashville, TN 37214
- For sales of electronic products (USA; for sales only):
- Voice: 800-933-9673 ext. 2830
- FAX: 800-308-6793
- Email: Word@ThomasNelson.com
- Internet: http://www.NelsonWordDirect.com
- World Wide Web:
- http://www.NelsonWordDirect.com
- http://www.logos.com (for general technical information on
- the LLS)
-
- ------------------------------------------------------------------------------------------------------------------------
- The MacArthur Study Bible, Copyright 1997, Word Publishing, a division of
- Thomas Nelson, Inc. All rights reserved.
- Logos Library System, Copyright 1995-1997 Logos Research Systems, Inc. All
- Rights Reserved.
- SIL Encore Fonts (TM) Copyright 1992-1996 Summer Institute of Linguistics.
- All Rights Reserved.
- The MacArthur Study Bible and Nelson/Word Electronic Publishing
- are trademarks of Thomas Nelson Inc. Logos Library System is a trademark of
- Logos Research Systems. Microsoft and Windows are registered trademarks of
- Microsoft Corporation.
- All other trademarks and copyrights are the property of their respective
- owners.
- Last Update: 06 October, 1997
-